ELETTRONICA
PJ20KPS-C/PJ25KPS-C
User & Technical Manual
Rev. 1.2 23/07/2012
104
7.8.3 Dial-up via mobile
The commands that can be sent to the transmitter using SMS messages are as follows:
Every time you send a command must always return back a reply message, to confirm that
the command was received and executed.
The reply message may arrive within a maximum time of 5 min. After this time the command
is void.
These commands can be sent only if the telephone number used is in memory of the
telemetry and the parameter “ACS” is set to “Yes”.
WARNING: The transmitter must be in REMOTE otherwise not receive any command.
Comando
Risposta
Descrizione
INFO
Station:
“nome stazione”-
ID:
“numero identificativo”
-
FWD:
“valore assoluto”-
RFL:
“valore assoluto”-
UNBAL:
“valore assoluto”
TX On (
oppure
TX Off
oppure
TX StdBy)-
Low Power /
Nom Power
Audio Present / Audio Absent
Alarm Present / Alarm Absent
Informazioni sullo stato
del trasmettitore.
TXON
Station:
“nome stazione”-
ID:
“numero identificativo”
-
TX is On -
Accensione
trasmettitore
TXOFF
Station:
“nome stazione”-
ID:
“numero identificativo”
-
TX is Off -
Spegnimento
trasmettitore
LOWPWR
Station:
“nome stazione”-
ID:
“numero identificativo”
-
LowPwr OK-
Attivazione Low Power
NOMPWR
Station:
“nome stazione”-
ID:
“numero identificativo”
-
NomPwr OK-
Attivazione Nominal
Power
ALARM
Station:
“nome stazione”-
ID:
“numero identificativo”
-
Alarm:
“lista allarmi in memoria”
Lista allarmi in
memoria
RESET
Station:
“nome stazione”-
ID:
“numero identificativo”
-
ALARM RESET OK-
Cancellazione allarmi
in memoria
Information about the
transmitter’s status
Switching on the
transmitters
Switching off the
transmitters
Low power setting
Nominal power
setting
List of the alarms in
memory
Resetting the alarms
in memory
Description
Reply
Command
“station name”-
“ID number”-
“value”-
“value”
“value”
(or TX Off or TX StdBy)-
“station name”-
“station name”-
“station name”-
“station name”-
“station name”-
“station name”-
“ID number”-
“ID number”-
“ID number”-
“ID number”-
“ID number”-
“ID number”-
“List of the alarms in memory”-
Summary of Contents for PJ20KPS-C
