background image

ELETTRONICA

PJ20KPS-C/PJ25KPS-C

User & Technical Manual

Rev. 1.2  23/07/2012

12

 

Menù Line            Description

Alarms

Summary of the occured alarms

Service

Service menu

Settings

Setting of the parameters (i.e. Power levels)

Exciters

Parameters of the exciters (i.e. output power, on air exciter)

Info

Information concerning the configuration of the PJ20KPS-C/

PJ25KPS-C

Release

Information concerning the hardware and software versions of the

modules composing the unit

Modem

Settings related to the optional telemetry system

Passwords

Setting and changing the password to change the parameters of 

the menu settings

To return to the predefined menu press key ESC many times.

Figure 5-3

5.1.3      Master Control Unit Menù

Informative menu on the inputs and the outputs of the MCU of the machine (Figure 

5-4).

 

Menù Line            Description

Ext Intl

Input status “external interlock” (JP4/4 parallel interface)

Aux Intl

Input status “auxiliary interlock” (JP4/5)

Exc1 A.Audio

Input status “audio alarm exciter 1” (JP4/8)

Exc2 A.Audio

Input status “audio alarm exciter 2” (JP4/9)

Mains

Indicates the status of phase control at the rear of the TX1.

Must be ON in order to ensure that the entire transmitter fun-

ctions, otherwise remain locked and the only visual alarm, will 

be the LED WAIT lit on the MCU. There appears no alarm line 

in “Alarms Menu”

L.P. Timer

Input status of the modality of automatic reduction of the power

Reserve-1

Input status “Reserve 1” (JP8/2)

Summary of Contents for PJ20KPS-C



















































































































Reviews: