ELETTRONICA
PJ20KPS-C/PJ25KPS-C
User & Technical Manual
Rev. 1.2 23/07/2012
88
The top of the telemetry contains the following connectors:
MODEM
RS-232
FUSE
2A
FUSE
2A
RESET
/PRG
Power on General alarmsModem present
Send msg Modem com.RS-232 Local W
aiting start
Modem
DB 9 female connector connected to the modem internal GSM
RS-232
DB 9 female connector to connect the GSM modem, with telemetry, or
to connect with the PC via RS-232 to the transmitter
Reset/prg
Button to reset the telemetry or programming
Fuse 2A
Fuse protection
Fuse 2A
Fuse protection
Power on
The LED on indicates that the telemetry is powered
General alarms The LED on indicates that the memory of the telemetry alarms are pre-
sent
Modem present The LED on indicates that the GSM modem is present and correctly
detected by the telemetry
Send sms
The LED on indicates that the GSM modem is sending SMS messages
Modem com.
The LED on indicates that the modem is connected
RS-232
The LED blinks when you connect your PC to the RS-232 telemetry to
communicate with the transmitter using the “Telecon 32bit”
Local
The LED on indicates that the transmitter is in LOCAL (via the selector
switch on the CCU) and telemetry will not send alert messages or you
can remotely connect to the transmitter
Waiting start
The LED blinks for about 45 on first boot. During this period, the te
-
lemetry, it analyzes the whole machine to check status and does not
send alerts
SMA connector for GSM an-
tenna or external directional
antenna
Insert the SIM
card slot
Bridge to connect
the GSM modem
Note:
you need to enter the bridge supplied with the telemetry between the connector MO-
DEM and RS-232 to connect the GSM modem, otherwise will not work
Nota:
Please note that to fully deploy the features of this telemetry system, the you will
need to sign a contract with a GSM service provider including DATA COMMUNICATIONS.
Summary of Contents for PJ20KPS-C
