RDMODWEB
ELETTRONICA
1
/ 24
Manuale Utente
Rev. 1.0 - 20/02/12
5.3.6 General settings
Note :
Access to this menu and modification of these parameters are only possible
after login with administrator rights.
This page not only shows the user the information about the exciter connected to
the
RDMODWEB
interface, but also allows setting various parameters.
Following is a description of the items that allow modification of the parameter,
with respect to the
Status
menu (chapt. 5.3.2). Press the
Update
button to confirm
selection; if you let timer to time out or press the
RVR
logo, the parameter setting
will remain as previously set.
5.3.6.1 Device menu
General settings
Run time
DEVICE
Device name
TEX300LCD
Node
1
Module
1
Echo timeout
1
Response timeout
1
Uart Baud
9600
ALARMS
SECURITY
Update
Menu 11
This page allows configuration of serial protocol parameters.
Note :
To avoid device malfunction, it is highly recommended not to make changes
within this sub-menu, if not otherwise explicitly suggested by
RVR
. Only
Device
Name
item can be modified with no problems.
Device name
Shows and sets device name.
Node
Shows and sets the node for serial protocol.
Module
Shows and sets the module for serial protocol.
Echo timeout
Shows and sets waiting time for receiving the echo character for the
serial protocol.
