3 / 34
User Manual
Rev. 1.1 - 07/02/14
TELINK-SNMP2
4.
Unpacking
The package contains:
1 TELINK-SNMP2
1 User Manual
1 Mains Power Cable
The following accessories are also available from Your R.V.R. Dealer:
•
Accessories, spare parts and cables
4.1
General
Description
Note : The equipment is set to a specifi c confi guration. The change of confi guration
is possible only by RVR or expert technical staff recommended by RVR.
The TELINK-SNMP2, manufactured by R.V.R. Elettronica SpA, is an SNMP
telemetry interface via LAN that can be connected to all standard equipment
manufactured by RVR.
The TELINK-SNMP2 have been designed for installation in a 1HE box for 19”
rack.
Two major features of TELINK-SNMP2 are compact design and user-friendliness.
Design is based on a modular concept: the different functions are performed by
modules that, for the most part, are connected through male and female connectors
or through fl at cables terminated by connectors. This design facilitates maintenance
and module replacement.
It also include a Web Server and SNMP agent that allows to be connected in
ethernet network and to be explored by a WEB and MIB browser.
The TELINK-SNMP2 can be connected to the internet through the utilization of
special devices properly confi gured. By default, the device has the 192.168.0.244
like IP address.
The power supply is galvanically isolated and the signals are fi ltered to have an
high immunity to RF disturbances.
Two LEDs on the front panel provide the following status indications: ON, LOCAL.
On front panel is placed also the modality selector for remote or local control
(REMOTE).
In rear panel there are ten led to a complete synoptic on the serial line traffi c and
diagnosis on error type.
TELINK-SNMP2 is equipped with watchdog hardware to reset the equipment
automatically in case of abnormal stop of processor or in case of lowering below
the threshold about power supply voltage.
