TOUCH30S
17 / 34
User Manual
Rev. 2.1 - 11/06/03
6.3.1 Audio setting menu
Let's start from the audio key: There are five pages available containing data to
insert:
• Sensitivity: is the input level sensitivity (it refers to the L and R balanced input
placed on the rear panel). The value can be set from -3.75 and 12 dBm with
0.25dB step, as described in the following picture:
It is needed to move the cursor under the character that you want to modify,
increasing or decreasing the value with the UP and DOWN keys
• The second page allows you to program the input impedance value. The two
permitted values are 600 Ohm or 10 kOhm:
• The third page allows you to set the limiter status and the preemphasis value:
The value of 50uS o 75uS depends on the different rules and can be set inside
equipment by shifting a jumper bridge.
The processor recognises the internal set value showing it on the display.
• The fourth slide sets the input status as Left: +, -, On, Off; and Right : +, -, On,
Off:
• The fifth and last page sets the transmission mode between mono and stereo:
Summary of Contents for TOUCH30S
