Step 2: Fuselage Installation
4. Rudder installation: Using
cutter to remove the rudder
covering along the mounting
slot and secure it to the pre-
opened mounting slot of the
tail pipe with 502 glue and
provided screws.
2. Using shrink tube covers one end of the push rod tube and secures it with 502 glue to
the servo mount and then install the servos.
3. Putting the fuselage mounting parts together like the pictures above and secures it to
the fuselage with screws.
1. Putting the wooden servo mount into the fuselage.
Then drilling 2 holes in the tail for push rods.
