无锡人人行拍网络科技有限公司
11
Light status
Description
Operation
Flash regularly
Receiver works well
NA
Other status
Receiver does not work well
Connect the power again or
contact with the customer
service
[5]: LINK light, For monitor Transmitter and receiver connect status.
Light status
Description
Operation
Turn-on
Connect with Transmitter
NA
Turn-off
Does
not
connect
with
Transmitter
1. Please wait for connecting
2. Make sure the Transmitter
is connecting the power.
3. Connect the power again
4. Bind the Transmitter and
receiver again.
[6]: HDMI light, For monitor the display device status.
Light status
Description
Operation
Turn-on
Display device connect well
NA
Turn-off
Display device does not
connect
Check whether the display
device connect correctly.
[7]: MOBILE light, For monitor mobile(iPhone
、
iPad) connect status.
Light status
Description
Operation
Turn-on
Mobile connect well
NA
Turn-off
No mobile connect
Mobile connect to device
Wi-Fi network.
[8]: POWER button, For turn on/off the power supply.
4.2.2 Right side port
1 2 3 4
Fig.4.2.2.1 schematic diagram of right side port
[1]: DC 12V~24V port, For power supply, plug in 3S~6S battery, Compatible with dc 12V~24V, the
maximum power is 12W.
[2]: HDMI port, For connect with the monitor, TYPE-A(Standard).
[3]: Mobile antenna interface, refer to the small antenna with 90°angle in fitting.
[4]: Antenna interface, For data communication with transmitter, refer to the long antenna in the