background image

无锡人人行拍网络科技有限公司

 

 

3. Introduction 

3.1 Disclaimer 

Thanks for purchasing the NEXG1 from Wuxi R2TECK. Everyone needs to read and understand this 

disclaimer before using the NEXG1. You are supposed to be accepted the disclaimer once the product is 

started to use. Please comply with the installation and using process indicated in this use manual. Wuxi 

R2TECK  will  not  be  responsible  for  the  consequence  of  the  improper  use,  improper  install,  improper 

modify. 

The product name, brand mentioned here are belong to R2TECK. 

3.2 Profile 

This  use  manual  as  the  instruction  of  HD  digital  FPV  video  transmission  system  NEXG1,  the 

components and functions mentioned here may not be the standard spec. please check the enclosed list 

with the product, please contact with the dealer if you have any question. 

The  right  of  the  manual  lay  out,  modify  and  release  only  belong  to  Wuxi  R2TECK,  Without  the 

authorization of Wuxi R2TECK, this use manual could not be copied or modified or released. 

The information in this manual is only for NEXG1 HD digital FPV video transmission system. 

This manual is subject to change without prior notice. 

3.3 Intended usage 

NEXG1 use for HD digital FPV video transmission system. 

3.4 Caution 

The  effectiveness  of  the  use  product  is  subject  to  if  comply  with  operate  and  maintain 

direction in this manual. 

Before starting the product, the staff must make sure the operate process and condition is 

correct.  Specially  to  check  the  product  cables  are  good  or  not,  if  the  cable  is  damaged, 

please change it before starting the product. 

 

NEXG1 is intended to use on racing drones or FPV fixed wing planes and other HD digital 

video  transmission.  NEXG1  may  not  be  reached  the  defined  function  if  it  works  in  the 

improper temperature, improper humidity and improver air pressure. 

NEXG1 should not work when it is wet. Have to make sure it is dry when you use it. 

 

NEXG1 is the high precise product, it is forbidden to beat and clash. 

 

 

Summary of Contents for NEXG1


















Reviews: