5.4 Deployment
1. Click on ”Lock & Deploy” to access the ”Deployment” page.
All the deployable devices are listed on the right. Use the dropdown menu to select a
searching/sorting criteria (MAC/IP/Name).
2. When the configuration changed, outdated devices will have a yellow update symbol
next to them. Click ”Deploy” or drag and drop the device to the MAC/IP on the right.
The updated devices will have a green check mark.
TIP
— When you click ”Deploy”, only devices with a yellow symbol will be updated. When you click
the green button next to deploy, the configuration will be sent to all devices, including the ones that
already have a green check mark.
3. The configuration is locked during deployment to prevent corruption of the configura
tion data set.
Choose either to continue the deployment or to unlock the configuration.
i
NOTE
— If you choose to unlock the configuration, the configuration deployment will stop.
i
NOTE
— Note that by choosing to change the configuration parameters, the entire network (including
stations that were deployed earlier) will need to be redeployed.
4. The deployment process cannot be started while the configuration is unlocked, so finish
modifying the configuration first. Then click on ”Lock” and redeploy all devices.
5. Using the Device
Page 26 of 45
