4
G
B
safety
The Buffalo has earned the CE-mark. This certifies that it meets all relevant Euro-
pean safety requirements.
The durability of this product is 7 years when it is used on a daily basis. Hereafter
we recommend that the product should be renovated (by R82 personnel) to extend
the lifetime.
Activate the brakes before placing the user on the tilttable. To obtain the best
control, place the user on the tilttable when it’s in horizontal position. The user
must be fastened securely before tilting into a vertical position.
Remove the CE-mark, when rebuilding the product or when using other than
original R82 spare parts.
Never leave your child unattended in this product. Ensure permanent super-
vision by an adjult. Incorrect use of the Buffalo, may cause serious injury to
the user. Take care that all the fixations and adjustments are placed and fitted
correctly and check it on a regular basis.
We do not recommend moving the Buffalo with the child in it over long distan-
ces, over joints in carpets, over uneven surfaces or outside.
Guarantee
Any R82 product, bought with an R82 dealer, includes a guarantee against defects
in types and materials. There is a 5 years guarantee on frame breaks.
The guarantee is given by the R82 dealer or subsequent R82 representative.
The guarantee can only be sustained if the R82 product is in use in the same
country as produced for. The guarantee does not cover accidental damages,
including damages caused by misuse or neglect. The guarantee stops if the se-
rial number is removed, or if the product is repaired or changed by others than
authorized R82 staff.
tools
Use the enclosed 6 mm Allen key to perform the adjustments where described in
this manual.
MaintenanCe
The Buffalo functions without maintenance, but it is recommended to clean
the frame frequently. Do not use any cleaning materials containing chlorine
or methylated spirit.
The carer should check and oil the swing away parts occasionally. We re-
commend to use a synthetic teflon oil.
Do not expose the gasspring to pressure, high temperatures or perforation.
Adjustments which are not described in this manual, must only be made by
authorized R82 personnel.
GB
GB
GB
GB
