background image

A

B

C

A

B

C

A

B

C

E

N

VEST AND CROSS VEST

Mount the fixlocks in the back. See page 18.

The vest and cross vest can be opened and 

closed by using the buckles and the zipper.

Follow the instructions below, with help from 

page 18.

*  Mount the shoulder straps in the belt fittings 

on the upper back. (A)

*  Mount the upper straps in the sides in the belt 

fittings on the back (B).

*  Mount the lower straps in the sidest in the belt 

fittings on the lower back (C).

Take care that all the fixations and adjust-

ments are placed and fitted correctly and 

check it on a regular basis.

STERNUM BELT

Mount the fixlocks in the back. See page 18.

The sternum belt can be opened and closed by 

using the buckles.

Follow the instructions below, with help from 

page 18.

*  Mount the shoulder straps in the belt fittings 

on the upper back. (A)

*  Mount the upper straps in the sides in the belt 

fittings on the back (B).

*  Mount the lower straps in the sidest in the belt 

fittings on the lower back (C).

Take care that all the fixations and adjust-

ments are placed and fitted correctly and 

check it on a regular basis.

19

Summary of Contents for Panda Futura

























Reviews: