4
Installation is now complete!
Verify the G200 Gateway is recognized
in the online portal, and can communicate to each SN400 sensor node.
Steps for provisioning of the node/gateway system, and general
operation of the web-based dashboard are located in the
R9 Online
Portal User Guide.
Installation Considerations:
1.
Do not over-use tape, screws, or other fasteners, as removal and servicing of the system may be necessary in the future.
2.
Heat from ovens, or hot exhaust can adversely affect GATEWAY operation. Avoid these areas for installation.
3.
Only install the gateway in weather protected areas, out of direct sunlight. If installed outdoors, select areas that are protected
from direct weather such as under the eaves of a building.
