Copyright © 2020 R9 Technology Inc. All rights reserved.
11
color. Then the LED will display solid green for a few seconds. Once the G200 is
initialized properly, the LED flash status will loop continuously as indicated in the table
below.
Gateway LED Stage 1: LTE Connection status (starts after long LED out
pause)
State Color
Blink
Count
Description
1
Green
2
LTE connection good
2
Red
2
LTE not connected
3
Orange
2
LTE portal error- the R9 data portal
connection has low through-put or is not
connected.
4
Red/Green Alternating LTE SIM card not installed
Gateway LED Stage 2 (after short LED out pause): Battery and Charger
status
State Color
Blink
Count
Description
1
Red
2
AC Plug not inserted in wall outlet, or AC
power is off
2
Green
2
LiPo battery Charging
3
Green
Solid
LiPo battery full charge
4
Red/Green Alternating LiPo battery not installed (not detected)
