INSTALLATION INSTRUCTIONS
RAB DESIGN LIGHTING INC.
22/10/2019
2
ORA-LED
WALL MOUNT
Remove the mounting plate on the back of the fixture by loosening the
screws using the provided Allen key.
Attach the mounting plate onto the junction box and connect the wires as
per wiring diagram.
Once wired, use the set screws and reattach the fixture to the mounting
plate.
WALL MOUNT WITH CONDUIT ENTRY
Remove the conduit entry on the back of the fixture by loosening the set
screws using the provided Allen key
Attach the conduit entry onto the desired location and connect the wires as
per wiring diagram.
Once wired, use the set screws and reattach the fixture to the conduit
entry.
WIRING
Check that the line voltage is correct.
Connect fixture
GROUND
(green) wire to power supply
GROUND
(green) wire.
Connect fixture
WHITE
wire to power supply
NEUTRAL
wire.
Connect fixture
BLACK
wire to power supply
LINE
wire
