INSTALLATION INSTRUCTIONS / NOTICE DE MONTAGE
RAB DESIGN LIGHTING INC.
MODEL: WL-LED
MOUNTING
1.
Connect the junction ground wire to the outlet box
2.
Mount bracket to outlet box using the mounting kit
flange screws.
3.
Connect the fixture ground wire to the mounting
bracket using the mounting kit green ground screw.
4.
Connect the mounting bracket to the outlet box
using the mounting kit two flange screws.
5.
Connect fixture white wire to outlet box white wire
with wire connectors (not provided)
6.
Connect fixture black wire to outlet box black wire
with wire connectors (not provided)
7.
Make sure all wires are safely contained inside the
outlet box.
8.
Thread the cap on the mounting bolt
9.
Place the fixture over outlet box and secure with the
mounting bolt
Indoor/Outdoor Wall Mount at minimum 4’
above ground
Use CSA Certified or
UL listed outlet box
for wet locations
Use CSA Certified or UL listed
connectors
