FXLED SLIPFITTER BILEVEL INSTRUCTIONS
®
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. This product must be installed in accordance with the applicable installation code by a person familiar with the
construction and operation of the product and the hazards involved.
WARNING:
Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
MOUNTING ARM ON FIXTURE
1.
Bi-level fixtures have LED’s wired in sets of three LEDs. The sets are shown below.
2.
Each set has leads brought through the slipfitter and labeled.
3.
Use the set for switching as needed in your application.
Set # 1
Set # 2
