Setup & Installation
2
Contact RAB to add your Daylight
Call us at 1(844) LIGHTCLOUD or email support@lightcloud.com
and we'll get your Daylight device added to your Lightcloud network
immediately. When USB power is removed, it is normal for this
LED to be unlit.
1
Plug in the Daylight device (setup only)
To join your Daylight to a Lightcloud network, plug it in with the included
Micro USB power adapter. The white Power Indicator will come on and
the Device Status Indicator will blink red every 10 seconds until it is joined
to your network. For setup purposes, you can plug the device in anywhere
that’s convenient, but please stay near the location where it will be
permanently installed in order to ensure continued network connectivity.
Once setup has been completed, you can unplug the device and it will
operate exclusively on solar power—no batteries necessary.
DEVICE STATUS INDICATOR