INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
1.
Secure
Surface Mounting Plate
to Junction Box
(by
others)
.
(Additional attachment to the ceiling may be
needed for longer fi xtures ).
8ft
TOMO
includes a 2nd
Surface Mounting Plate
and
Surface Mount Adaptor
Plate
for optional use
(see Fig. 2)
.
2. Remove
End Caps
as shown in Fig. 1. Separate the
Housing Cover
from the
Lens and Tray Assembly
by
sliding the
Housing Cover
to the right to unlock from
Key
Slots
as shown in Fig. 3
.
Pre-installed
Tether Cables
(2)
will
prevent
Lens and Tray Assembly
from separating from
Housing Cover
as shown in Fig. 1.
3. Pull supply wires from Junction Box
(by others)
through
center of
Surface Mounting Plate.
Use appropriate
UL rated wire connectors as required by code to make
electrical splices to fi xture leads.
4. Align S
urface Mount Adaptor Plate
to the
Housing
Cover
. Using
(4)
Screws
(provided)
secure to the
Surface
Mounting Plate.
5.
Follow appropriate wiring instructions per code.
6. Push
Lens and Tray Assembly
into the
Housing Cover
.
Align
Keys
into
Key Slots
and slide to the left to lock the
Housing Cover
into the
Lens and Tray Assembly
. Snap
on
End Caps
.
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sharp objects.
TOMO- 2FT
End Cap
(2)
Surface Mounting Plate
Housing Cover
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fi xture. No user serviceable parts inside.
The fi xture is suitable for indoor applications. Suitable for damp locations. Ceiling, Canopy and Pendant mount only.
CEILING MOUNTING
Fig: 1
TOMO- 4FT
TOMO- 8FT
Surface Mount Adaptor Plate
Lens and Tray Assembly
Screws
(4)
Tether Cable
(2)
Lens and Tray Assembly
Key Slot
Housing Cover
Surface Mount Adaptor Plate
Fig: 2
Fig: 3
