INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
CLEANING & MAINTENANCE
CAUTION: Be sure fi xture temperature is cool enough to touch.
Do not clean or maintain while fi xture is energized.
1. Clean acrylic lens with non-abrasive cleaning solution.
2.
Do not open the fi xture to clean the LEDs. Do not touch
the LEDs.
TROUBLESHOOTING
1. Check that the line voltage at the fi xture is correct.
Refer to wiring directions.
2. Is the fi xture grounded properly?
Note:
These instructions do not cover all details or variations in equipment
nor do they provide for every possible situation during installation, operation
or maintenance.
Universal voltage driver permits operation at 120V through 277V,
50 or 60 Hz. For 0-10V dimming, follow the wiring directions as
shown in
Fig. 12.
1. Connect the black fi xture lead to the LINE supply lead.
2.
Connect the white fi xture lead to the COMMON supply lead.
3. Connect the GROUND wire from fi xture to supply ground.
4.
Connect the purple fi xture lead to the (V+) DIM lead.
5.
Connect the pink fi xture lead to the (V-) DIM lead.
6.
Cap the yellow fi xture lead, if present. Do NOT connect.
0-10V DIMMABLE WIRING
PINK
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE
BLACK
WHITE
PURPLE
Fig: 12
