9
Main Unit Control Button
You can control the air purifier by the main unit control button. When you press
the button, the operation mode of the air purifier will be changed according to
the following diagram.
Cleaning and Maintenance
Auto Mode
Silent Mode
Low Speed
Medium Speed
High Speed
Turbo Speed
Standby
To maintain optimum performance of this product, please clean the unit and filters as recommended.
CAUTION
When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands.
Electrical shock and/or bodily injury may occur as a result.
1. Cleaning the Unit Surface and Air Quality Sensors
The unit surface should be cleaned at least once a month or sooner depending on the air
quality of the room.
Use a clean, dry cloth to wipe the external surfaces of the air purifier.
Use a damp cloth to remove stubborn stains and dirt build up if necessary.
Do not use commercial cleaning agent as it may damage the unit surface.
Clean the air inlet and outlet with a dry cloth or a vacuum cleaner. (Fig. 1)
To clean the unit surface:
(Fig. 1)
The air quality sensors should be cleaned at least once a month or more depending on
the air quality of the room.
Take off the front panel.
Clean the surface of the sensor opening with a vacuum cleaner.
To clean air quality sensors:
2. Cleaning the Pre-Filter
The pre-filter should be cleaned at least once a month or when the filter cleaning indicator
illuminates.
After removing the front panel from the air purifier, run a vacuum cleaner with a nozzle or
brush attachment on low power setting along the filter to pick up the pet hairs or particles.
(Fig. 2)
To clean the pre-filter:
(Fig. 2)
