KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 13 -
9901.00.23EN00 - 01/2016
3.3
Technical data for solid sheet body*
Body designation
Maximum
working depth
approx. cm
W
orking width
up to approx.
cm
W
eight
kg
Description
BP-351 O
40
50
56
Single-part share with reversible points, Plasmabid hard coating or uncoated.
BP-322 P
38
50
56
Single-part share with reversible points or Plasmabid hard coating.
BP-320 W
30
50
56
Single-part share with reversible points or Plasmabid hard coating.
BP-341 W
35
50
56.5
Single-part share with reversible points or Plasmabid hard coating.
BP-351 W
35
50
55
Single-part share with reversible points, Plasmabid hard coating or uncoated.
BP-365 P
30
50
56
Split share with hardened points.
3.4
Technical data for slatted body*
Body designation
Maximum
working depth
approx. cm
W
orking width
up to approx.
cm
W
eight
kg
Description
BP-331 WS
30
45
35
Single-part share with Plasmabid hard coating, no reversible points.
BP-322 PS
38
50
60
Single-part share with Plasmabid hard coating or reversible points.
BP-323 PS
38
50
61
Single-part share with Plasmabid hard coating or reversible points, wide lower stripes.
BP-355 RS
40
50
61
Single-part share with Plasmabid hard coating or reversible points.
BP-351 WS
35
50
58
Single-part share with Plasmabid hard coating, no reversible points.
* Installing the plough bodies: Contact your licensed dealer who
can advise you according to your working conditions.
3.5
Technical data for pressure tank
Description
Data
Design
(UH¿OODEOH
Nominal volume
0.75 litres
Gas preload provided by the factory
¿OOLQJSUHVVXUH
80 bar
0D[LPXPSHUPLVVLEOHRSHUDWLQJSUHVVXUH
250 bar
Filling gas
Nitrogen
2SHUDWLQJÀXLG
Hydraulic oil
Permissible operating temperature
-10°C to +80°C
