KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 46 -
9901.00.23EN00 - 01/2016
10.7 Working in the field - adjusting
settings
10.7.1
Safety during operation
Danger:
General risk of accident while working with the
implement. Always observe the safety instructions in
Chapter 1.0 - Page 9 and the operating instructions
of the basic implement.
Warning:
Risk of accident due to crushing during set-up
and adjustment. With all work care must be taken
to ensure that the implement is in a safe position
and has been secured against rolling away.
10.7.2 Working
information
Observe the working values in the "Description of the implement"
- page 12 chapter.
10.7.3
Adjustments during operation
During operation, you can make or modify the following settings:
ʈ
Adjust disc coulter (additional equipment)
ʈ
Adjust standard skimmers (additional equipment)
ʈ
Adjust trash boards (additional equipment)
ʈ
Adjust subsoiler (additional equipment)
10.8 Adjust disc coulter (additional
equipment)
10.8.1
Adjusting the disc coulter's working depth
Adjustment instructions
T
F
ʈ
T = factory setting: 30 cm
ʈ
) OLPLWWKHGHSWKVRWKDWWKHUHLVDWOHDVWDSSUR[LPDWHO\
5 cm of free space between the disc bearing housing
and the ground.
Adjustment
2
1
a
Key
1 Fastening
screw
2 Working
depth
ʈ
Undo the fastening screw (1).
ʈ
Use the tooth system (a) to adjust the working depth (2).
ʈ
Tighten the fastening screw (1) to the correct torque.
Torque
Size
Quality grade 8.8
:LGWKDFURVVÀDWV
Nm
Ib/ft
M 20
464
342
30
