15
Pavo V 140 / VHA 140
09.2011
Safety
1.15 Safety instructions - Care, maintenance and repair
WARNING
Risk of accident when performing maintenance work.
You should always work with particular care and never in a hurry.
When working on the mounted implement:
wait until the implement has come to a complete standstill
lower the implement fully
switch off the engine
remove the ignition key
Before performing work on the hydraulic system, lower the implement and depressurise
the system.
When performing care and maintenance tasks, wear work gloves and the prescribed
working clothing.
All tasks must be performed using suitable tools.
Always disconnect the power before starting any work on the electrical system
(e.g. lighting)!
Before performing welding work, disconnect all power connections to the tractor.
Secure the implement to prevent unauthorised start-up while such work is in progress.
WARNING
Risk of accident due to pinching or crushing while performing adjustment, care,
maintenance and repair work.
Turn off the engine of the tractor and take the key out of the ignition.
Only perform work when the implement is in a safe condition and has been secured to
prevent it from dropping and rolling away.
Use all provided supports.
During all work, wear work gloves, the prescribed working clothing and protective
equipment.
If the implement is folded, use additional means to secure it against unfolding
unintentionally.
Close the provided shut-off valves, engage mechanical locks.
Risk of injury due to heavy components.
When handling heavy components, use suitable lifting devices or seek the assistance of
a second person.
Risk of accident due to failure to perform maintenance tasks or not doing so properly.
Replace self-locking nuts during reassembly with new ones.
Do not replace self-locking nuts with normal nuts.
For threaded connections with spring washers, inspect the spring washers during
reassembly, and if necessary replace with new ones.
Never replace shear bolts with standard bolts.
Only replace nuts and bolts, where necessary, with those of the same strength class,
e.g. 8.8.
Observe the tightening torques.
Check the tyre pressure regularly.
Perform a regular visual inspection of the brake system for damage.
Only use original spare parts.
•
•
-
-
-
-
•
•
•
•
•
•
•
•
•
•
-
•
•
•
•
•
•
•
•
•
•
Summary of Contents for Pavo V 140
