Operating Instructions
The air compressor is designed to inflate automotive and light truck tyres to the
manufactures recommended pressure.
It can also be used to inflate small low pressure inflatables such as sport balls & air
cushions.
Preparation for use:
Before plugging in the compressor ensure switch is in the “OFF” position.
If the compressor does not function check the power connection is secure.
Note: You may have to turn the car ignition on (to position ‘I’) before starting the
compressor. This is normally the first position without the car actually starting.
Warning
Always check that the car is in neutral and the handbrake is on.
•
This compressor is designed for use with a car 12V DC power supply; do not
•
connect to any other type of electrical power.
Power connection:
Pull out the air supply cable and the power cord.
•
Plug the power cord into the 12V DC cigarette socket (Note: Check that the
•
compressor switch is in the ‘OFF’ position).
Using the Compressor:
Attach the air supply cable (Dia.6, item 1) securely to the tyre valve or other item
•
to be inflated, use adaptors if necessary.
Press the air switch to the “ON” position, the compressor will start.
•
Inflate the tyre (or other item) to the pressure required then switch the
•
compressor ‘OFF’.
Disconnect the air supply from the tyre valve or inflatable.
•
Note: when inflating a tyre always double check the air pressures using an
accurate pressure gauge i.e. pencil gauge / digital gauge.
Light Functions
Turn the light switch to the flash position, for a 3 LED flash warning signal
•
Turn the light switch to the light position, for a 4 LED work light.
•
Technical Specifications
Power requirement:
12V dc
Wattage:
120W
Maximum air flow:
22L/m
Duty Cycle:
15 minutes ON / 30 Minutes OFF
-2-
All manuals and user guides at all-guides.com
