2) Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBD2 cable.
3) Plug OBD II Cable into the vehicle’s DLC.
3.7 Product Setup
The scan tool allows you to make the following adjustments and
settings:
1)
Contrast adjustment:
Adjusts the contrast of the LCD display.
2)
Unit of measure:
Sets the Unit of Measure to English or Metric.
3)
Tool self-test:
Tests the LCD display and the keyboard.
The settings of the unit will remain until change to the existing
settings is made.
To enter the setup menu mode
1)
From the keyboard:
Press and hold the
N
button for at least 3
seconds until
System Setup
menu shows up. Follow the
instructions to make adjustments and settings as described in the
following setup options.
2)
From the Vehicle Diagnosis menu:
Use the
UP/DOWN
Scroll
Buttons to select
System Setup
and then press the
Y
button.
Follow the instructions to make adjustments and settings as
described in the following setup options.
13
