Installation
Installation
the top-of-pole mounting
top of the pole.
Tighten the grubscrews to secure
mounting.
Fix the surface mounting back box to
·
the top-of-pole mounting with the
screws provided.
4.
Connect the cabling, as detailed under
"Electrical Connections", and then fit
to the back box (as described
Wall Flush Installation,
Electrical Connections
The cables are passed through relevant conduit and connect
wired situations) to the tag block on the instrument.
Connect the
9
volt approved D.C. power supply Pt.No.
RAI
050
8
and ensure that it is switched on. The adjacent
light
0
0
eJ!J�rnal hearing aid induction loqpj§ to be inst(,).
connect to
nee with the connections belqw and mount vertically aro
For these versions
(/1011 - /1013)
the Autodial keys
The program memory requires power. This is
although loss of this power will not cause
disconnection and not at all if the line connection
connection in place during programming.
-8 -
0
0
