1261B User Manual
Racal Instruments
Ó
1995
Configuring The 1261B 2-13
Refer to
Figure 2-8
and
Table 2-2
and perform the following steps
to install the rack mount door.
1. Install lower halves of the two hinges (part of Item 2) to the
rack mount ears with flat head screws (Item 4).
2. Install upper halves of hinges on the door with pan head
screws (Item 3).
3. Install door stop (Item 5) on opposite rack mount ear with
self-tapping screws (Item 6).
4. Align hole in door hinges with hinge pins on rack mount ears
and mate together.
5. Latch door into place by turning latch knobs fully counter
clockwise. Close door and turn knobs clockwise until door is
secure.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
