6
7
Caution
The heater is not equipped with room temperature control. Do not use the heater
in small rooms if they are occupied by people who are unable to leave the room
on their own, unless they are continually supervised.
Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
Table top assembly
lf you purchased our heater without the table top installed and you would like to
assemble the device on your own, please follow the procedure specified below.
Assembly instructions:
1. Place the table top on a flat, smooth surface.
2. Place the heater on the table top upside down.
3. Put the heater in the centre of the table top and ensure that the edges of
the top part are parallel to the edges of the table top ar that they are situated
in the centre of the circular table top.
4. Using self-drilling screws, attach the top part of the heater to the table top.
5. Turn the heater with the attached table top over and place it on the plastic
adjustable legs.
6. lf necessary, use the plastic adjustable legs to balance and stabilise the
heater so that it does not jiggle back and forth.
Recommended table tops: Form-pressed laminate table tops (Werzalit). For more
information about table tops, see: http:www.racaminetto.com
