8
9
Warning
• The heater must not be used without a properly attached table top due ta the
risk of injury From electric shock.
• The table top must be made of durable, non-flammable and non-meltable
material. Do not use rattan or reeds as there is a risk of combustion!
• The minimum size ofa square table top is 70cm x 70cm and the minimum
diameter of a round table top is 70cm. These table top sizes were used as the
minimum safe distance in tests where the table was placed in a corner adjacent ta
the walls.
• The maximum allowance weight ofa table top is 9kg.
• The table top must completely cover the top part of the heater and must be
attached using the screws located in the designated openings in the top part.
• Use self-drilling screws to attach the table top. Select a suitable table top
thickness to prevent screw damage to the table top.
The appliance manufacturer is not liable for table top assembly by the user or for
any health or property damage incurred.
Use
The product is designed ta provide heat to people in either interior or exterior
settings.
• The product was not designed for purposes other than that specified in these
instruc tions for use. Any inappropriate use of the product may be dangerous.
The heater may only be used in a vertical position. The product is not designed to
be attached to a wa[[ or cei[ing.
Before using the product for the first time, remove all packaging material
and unwind the power cable before connecting it to a power socket. The
packaging material is recyclable. in the interest of environmental protection,
dispose of the packaging in a recycling bin.
• Place the heater on a firm, straight surface.
• Follow the instructions provided in this guide to attach the heater to an
appropriate table top.
• Before turning the heater on, make sure the heating tube and power cable have
not been damaged and that neither the socket nar the heater are wet or damp.
• Only connect the product to an AC voltage power source with the
corresponding voltage range (230V). Connect the heater to the power grid via a
socket that has all the power contacts as well as
a protective grounding pin.
