2. INSTALLATION HANDLEBAR
1. Unscrew the bolt with washer and nut from the steering column.
2. Attach the handlebar model to the steering column.
3. Connect the steering column from the front with the removed screw and washer.
On the other side, place the nut on the screw and tighten with a torque wrench.
4. Fit the front steering column cover and secure it with two screws
3. INSTALLATION FRONT WHEEL
1. Prepare the front wheel with shaft and spacer rollers. The roller shaft was removed in part 1
(7).
2. Pass the shaft through the left fork and insert the SMALL spacer roller into the inner space
between the fork and the brake disc. When changing the rollers, the wheel cannot be put on!
3. Fit the wheel so that the brake disc is on the left.
4. lnsert the shaft rod through the wheel and insert the LARGE spacer roller and slide the shaft
rod through the right fork.
5. Then fit the washer with the nut and tighten with a torque wrench.
5
