19
RaceAmerica Model 2650 Series XL Advanced
ConFiG
rACE
[#]
[8]
PrE-St
OFF
StAGE
button
on
trEE
110 AC
230
AC
12
dC
rEdS
First
both
rt 0.0
on
OFF
[8]
[#]
[#]
[#]
[#]
[#]
[8]
[8]
[8]
ConFiG
trEE
[8]
*8 CONFIG
Blank
Blank
Fig 9 - Configuration Menu, Press *8 [CONFIG]
totAL
ET
ET+RT
[8]
[#]
FiniSh
LiGht
1
2
3
4
5
[#]
[8]
Blank
with the track electronics option; repeated presses
of the
[8]
CONFIG
key cycles the lower display
through the other options. These include
[OFF]
which deactivates all Pre-Stage display,
[StAGE]
will turn on the Pre-Stage lights with the Stage
lights,
[button]
will turn on the Pre-Stage lights
the first time the
[0]
RUN
key (or Push-button) is
pressed to manually control the Pre-Stage lights.
This is useful to tell the next set of drivers to
come to the line.
[On]
will set Pre-stage to operate
independently. Press the
[#] ENTER
key to accept
the desired condition and move to power source
[trEE] [110 AC]
; press
[8]
to view
[trEE] [230
AC]
; press
[8]
to view
[trEE] [12 dC]
; press
[#]
to select the correct tree voltage and move to red
lights to be displayed
[rEdS] [FirSt]
to display
only the first lane to redlight. If both lanes redlight,
press
[8]
to cycle to [rEdS] [both]. Press
[#]
to
move to Reaction Time (RT) reporting
[rt 0.0]
[Off]
. Select OFF to use the 0.400/0.500 reporting
from the last yellow or select
[On]
to report RT
from the Green light (positive or negative); press
[#]
to select the winning lane lights to display
[FiniSh] [LiGhtX]
where five choices for
X
(1-
5) can be selected. Choice ‘0’ does not indicate
winner on the tree. Choice ‘1’ displays winning
lane, redlights and breakouts; choices ‘2-5’ have
five second animated winning lane displays only
(go ahead, check ‘em out); press
[#]
to go to the
main menu.
CONFIGURE RACE
