04 - LabSat3 Menu layout
File
•
Info
- Display file info for selected file.
•
Delete –
Delete selected file Yes/No.
•
Format SD/USB –
Erase and Format SD/USB Yes/No.
Constellation
•
GPS/GAL –
Tick to select GPS/Galileo constellation for recording.
•
GLONASS –
Tick to select GLONASS constellation for recording.
•
BeiDou –
Tick to select BeiDou constellation for recording.
•
2Bit –
Record with 2 bit quantisation when single constellation is selected.
Play
•
Loop –
selected file will replay continuously.
◦
Pause Time
– Defines the pause time between each replay.
•
From
– Specify a time in the scenario to replay from.
•
For -
Specify how long the scenario will replay for.
Record*
•
For
- Specify how long the LabSat 3 will record for.
Setup
•
Display –
Adjust display contrast and backlight brightness.
•
RF Test –
Outputs RF test signal.
•
Power Save –
When selected, will power down display backlight and internal monitor during recording.
•
CLK REF
◦
Internal
- As the default setting LabSat 3 will use it internal reference clock.
◦
External 10MHz –
Allows the user to connect a 10 MHz reference signal on the REF input.
https://racelogic.support/03LabSat_GPS_Simulators/LabSat_3/LabSat_3_User_Manual/
14
Summary of Contents for LabSat 3
