14. The Advanced Playback Control also allows users to define a specific start point, end point, or duration of a
scenario. In the example shown previously the scenario is set to start 28 seconds from the beginning, and the end
point has been set to 1 minute 50 seconds into the scenario, giving a total scenario replay time of 1 minute 22
seconds. The slider position, on Advanced Playback Control indicates progress along the specified scenario
length. The scenario may also be fast forwarded, and rewound, by clicking on the progress pointer, and dragging it
along the blue progress bar. If you wish to start replaying a scenario at some point other than the start of the file.
The Start Point setting may be used to specify the time to advance the replay start point. By combining the ‘Start
Point’ and ‘End Point’ or ‘Length’ functions, it is possible to select a particular time segment out of any given
scenario.
Note: At least 30 seconds of constant satellite data is required for the receiver to collect the necessary data to use that
satellite so choose sections of the recording with good view of the sky to reflect the real world situation when
commencing replaying a section of the scenario.
15. GPS Monitor displays the NMEA Output from the internal LabSat GPS Receiver during scenario replay.
https://racelogic.support//LabSat/LabSat__-_User_Manual/10_-_LabSat_Replaying_GPS_Data
4
