VBOX PROLITE User Guide
Page 11 of 20
7. Connect the power cable/ battery pack to the
VBOX
8. If using 12v power cable, connect to vehicle
9. With the power applied, the red PWR led should illuminate. The VBOX Pro Lite will start
searching for satellites. The Green led will indicate the number of satellites currently in
lock. For best results ensure the VBOX has acquired a lock on 5 or more satellites,
essential for quality signal reception. When using the VBOX for the first time or when
using the VBOX after a long period of time, allow the VBOX to sit for between 5 and 10
minutes to re-collect data needed to track satellites.
Data will be recorded to the internal RAM.
NOTE before using the Internal RAM, the RAM should be cleared. See section ‘Setup’ of
the VBOX Software manual.