Load Reference Lap
To load a reference lap file stored from a previous session, you put the desired file onto an SD card and load the
card into the VBOX LapTimer. The file can have any name, however, it must be saved in the Data folder and only
one .REF file can be present. Select the menu options as shown above – but select LOAD REF LAP instead of
SAVE. Note that the vehicle must be stationary to make this transfer. Reference laps will be reset either when you
set a new start/finish is set, or if you select the ‘reset lap timing data’ option from the lap timing menu in the main
menu. You can read more about loading reference laps
.
You can create a reference lap with the Circuit Tools software as described
here
.
Live Timing
The main predictive screen shows a continuously
updated bar graph with the +/ - to the previous lap.
When a lap is completed, it will give a final lap time and
total time difference to the reference lap. If you achieve
a faster time than the reference, it will show a negative
time.
You can alter the amount of time shown on the bar
graph in the main menu to 2, 5, 10 or 30 seconds.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/04_Display_Modes_%E2%80%93_VBOX_LapTimer
18