Logging Options
In this sub-menu, you can configure how VBOX
LapTimer’s logging is triggered. There are three logging
options.
Note:
You cannot configure logging mode when the
LapTimer is used as an OLED. In this case you need to
do the configuration in the connected unit’s software e.g.
Video VBOX Setup.
Logging Mode
You can define the mode and speed that triggers the
start and stop of logging.
When Moving
Default.
Logging when moving means that the LapTimer starts
logging when it detects movement.
Manual
Manual logging mode means that you choose when to
start or stop logging – it will never start or stop
automatically. You can control the logging with the
square
button when you are in the speed mode display.
Continuous
When you have selected continuous mode, the VBOX
LapTimer will start logging as soon as it detects power
and media. You must stop the logging, by pressing the
square
button when in speed mode. It is important that
you manually stop the logging before you remove the
SD card.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/05_Menu_Options_%E2%80%93_VBOX_LapTimer
27
