points and turns to improve lap times.
This mode is disabled by default.
Max Braking G
You can set the maximum braking g indicated by the
LEDs (max is 1.9 g), by pressing the
square
button.
Each press will add 0.1 g to the value. Press one of the
arrow buttons to save the displayed value and move to
the next setting.
Default is 1.0.
Max Cornering G
You can set the maximum cornering g indicated by the
LEDs (max is 1.9 g), by pressing the
square
button.
Each press will add 0.1 g to the value. Press one of the
arrow buttons to save the displayed value and move to
the next setting.
Default is 1.0.
LED Minimum %
You can configure the minimum percentage for the LED
to set when the LED colours appear. Press the
square
button to change the percentage. You will see two
arrows (up and down) appear next to the number. Use
the two arrow buttons on the device to increase/
decrease the percentage. Press the
square
button
again to confirm your selected value.
You can find more information on how this mode affects
the LEDs, in the
Default is 50%.
Back
Press the
square
button with this line highlighted to exit
the Combo G LED Mode settings and go back to the
Predictive Lap Timing Settings.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/05_Menu_Options_%E2%80%93_VBOX_LapTimer
31