Minimum Speed
Press the
square
button to change the minimum speed.
You will see two arrows (up and down) appear next to
the value. Use the two arrow buttons on the device to
increase/decrease the minimum speed value. Press the
square
button again to confirm your selected value.
The default Min Speed is 10 km/h.
Stop Logging Delay
Press the
square
button to change the logging delay
time. You will see two arrows (up and down) appear next
to the value. Use the two arrow buttons on the device to
increase/decrease the logging delay time. Press the
square
button again to confirm your selected time.
The default stop delay is 3 s.
Back
Press the
square
button with this line highlighted to exit
the Logging Options and go back to the main menu.
Predictive Lap Timing Settings
Delta-T Bar Range
This setting alters the amount of +/- time shown on the
bar graph during lap prediction. You can choose
between 2, 5, 10 and 30 seconds – the default setting is
0 - 5 km/h.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/05_Menu_Options_%E2%80%93_VBOX_LapTimer
28