Save Ref. Lap to SD Card
This setting allows you to save a reference lap for future
use. Insert an SD card into the VBOX LapTimer and
press the
square
button on this option to save the
current reference lap to the SD card.
Note: The vehicle must be stationary to make this
transfer.
When you have selected this, the "SAVE
COMPLETE" message confirms that the lap has been
saved successfully. The saved data will be stored on the
SD card as LAP.REF in the ‘Data’ folder.
Load Ref. Lap From SD Card
To load a reference lap stored from a previous session,
save the desired file onto an SD card and load the card
into the VBOX LapTimer. You can name the file anything
you want, however, you must save it in the 'Data'
folder. Only one .REF file should be present in this folder
at all times.
Note: The vehicle must be stationary to make this
transfer.
Reference laps will be reset either when you set a new
start/finish or when you select the ‘reset lap timing data’
option from the lap timing menu.
Minimum Lap Time
This setting allows you to set a minimum time for laps,
making shorter laps invalid. Invalid laps will not be
counted in the lap count, appear in the lap times or used
as a reference lap.
Press the
square
button to change the minimum lap
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/05_Menu_Options_%E2%80%93_VBOX_LapTimer
32
