General
1.
Connection
- Selected COM port, refresh and disconnect buttons.
2.
Units
- Specify the distance, acceleration & velocity units.
3.
VBOX Information
- Serial number and installed firmware version of connected unit.
4.
Load/Save Configuration
- Load/Save settings from/into a Racelogic setting file (.RSF).
5.
Language
- Select an operating language.
6.
Diagnostics
- Live preview of satellites, latitude, longitude, velocity & accumulative distance.
7.
GPS Information
- Reports the internal GPS engine type and allows user to coldstart the unit.
8.
Write to unit
- After making changes to setup, the write to unit button must be selected to upload settings.
https://racelogic.support//01VBOX_data_loggers/VBOX_Micro/VBOX_Micro_-_User_manual/05_-_VBOX_Micro_Configuration
12