06 - VBOX Mini Input Module Mode
The Input Module screen provides the ability to configure the input and output channels of a connected Mini Input
Module and view the data on each of the input module channels.
Input module connection
The VBOX Mini is able to connect to a Mini input module using an RLCAB045 and Micro Input module using an
RLCAB094 cable plugged into the Auxiliary connector on the back of the VBOX Mini to socket DATA2 on the Mini Input
module, and the Data socket on the Micro Input Module.
If an input module is connected to a VBOXMini and it has been initialised then the VBOXMini will automatically log all of
the input module channels to the SD card.
Initialising the Mini Input module
In order for the VBOX Mini to log the input module data channels, the Input Module screen must be accessed whilst the
input module is connected and the VBOX Mini has satellite lock. After the Input Module screen has been accessed the
screen will briefly display the following message.
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
14