which case it flashes an image of a satellite.
5. Now perform your 0-60 acceleration run. As your vehicle goes over 60 mph the time will instantly show in the 0-60
section of the window.
6. If you come to a stop you will see that this time remains on view. The Vmax section will also show the highest
speed you attained during this particular run.
7. You can now instantly start another 0-60 acceleration, as you pull away the screen will reset and show your new
values as you cross 60 mph.
8. After doing a number of runs you can view your best 0-60 time by scrolling to the BEST screen.
9. If you have your SD card inserted then your run data will be stored.
Please note
, to record a results file, you must accelerate over at least 30 Km/H.
Editing a Performance mode Test Range
You can configure the minimum and maximum speeds of two of the acceleration ranges, the 0-100-0 range, the
deceleration ranges, and one of the distance ranges, to give an array of useful tests.
If you wish to change the speed range over which performance is measured, press the
MENU
button from any of the
performance mode screens and select the range you wish to change from the ‘Performance Menu’ and press
OK
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
24
