Drift Telemetry
If in Drift Sectors mode and sector 1 start gate is crossed, the unit will send a telemetry message.
If in Drift Sectors mode and a sector end gate is crossed;
If ‘TELEM.FORMAT2’ is not enabled the unit will send telemetry message 1.
If ‘TELEM.FORMAT2’ is not enabled the unit will send telemetry message 7 and also write the information into a
scores.log file.
If in Drift Practice mode (sectors not selected) the unit will output practice drift information at 10 Hz shown below:
$DBOX,sss.s,±g.gg,±l.ll,±ddd.d,pp.pp
Yaw Diagnostics
Will output temperature, yaw rate and yaw calibration (offset and gain) as shown below:
01828,01763,1766.10, 6.82545
01828,01767,1766.10, 6.82545
01828,01762,1766.10, 6.82545
01828,01767,1766.10, 6.82545
01828,01769,1766.10, 6.82545
01828,01764,1766.10, 6.82545
Where:
Temperature is corrected ADC count 2 + Calibration MinTemperature.
yaw rate is corrected ADC count 3.
yaw cal offset and gain are the current gain and offset being applied to calculate the yaw.
Speed Buzzer
The speed buzzer is generally for use whilst in Performance Mode, during 0-100-0 style tests. The speed is configurable
from this menu option – see the Speed Buzzer section under Performance Mode.
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
44
