Racelogic VBOX SIGMA, Quick Start Manual

Network Screen

Setup

Configuration of VBOX Sigma is performed using a Wi-Fi hotspot access point created by the unit. You can then log in
to this access point on your phone or a computer and use a webpage to configure the unit to either use the internal GSM
modem or an external Wi-Fi hotspot to connect to your chosen correction service. Other settings options include CAN
and VBO log settings along with status information. Settings are retained after a power cycle.

If the unit is configured to use both the internal GSM modem and an external Wi-Fi hotspot, it will attempt to auto
connect to the Wi-Fi hotspot first on power up.

1. Attach the supplied cellular antenna (ANTMSTUBSMAM) to the SMA connector on the

top of the unit

.

2. Attach the supplied GNSS antenna (RLACS308) to the SMA connector on the

bottom of the unit

and mount in

the centre of the roof of the vehicle, away from roof bars and other antennas. For more information on antenna
mounting positions

click here

.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/Quick_Start_Guides/VBOX_Sigma_-

_Quick_Start_Guide

6