VBOX Sigma - CAN Output Format
VBOX Sigma has a CAN output which is present on the 6-way hirose connector on the
•
Data format
: Motorola
•
Baud rate
: Configurable - 125 kbit/s, 250 kbit/s, 500 kbit/s or 1000 kbit/s via the
.
ID**
Data Bytes
1
2
3
4
5
6
7
8
0x301
(1) Sats
(2) Time since midnight UTC
(3) Position – Latitude MMMM.MMMMM
0x302
(4) Position – Longitude MMMM.MMMMM
(5) Speed (kts)
(6) Heading (°)
0x303
(7) Altitude. WGS 84. (m)
(8) Vertical velocity (m/
s)
Unused
0x304
Unused
(9) Long Accel. (g)
(10) Lateral Accel. (g)
0x308
(11) Position – Latitude
Unused
(12)
Solution
Type
0x309
(13) Position – Longitude
Unused
0x32B
(14)
GPSDayH
(15)
GPSDayL
(16) Diff
Age
(17) Serial Number
Unused
**Default Identifiers. The identifier values can be changed using the configuration software.
1. If <3 satellites in view, then only Identifier 0x301 transmitted and bytes 2 to 8 are set to 0x00.
2. Time since midnight. This is a count of 10 ms intervals since midnight UTC. (5383690 = 53836.90 seconds since
midnight or 14 hours, 57 minutes and 16.90 seconds).
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/07_-
_VBOX_Sigma_Technical_Properties/VBOX_Sigma_-_CAN_Output_Format
36