If you have come to a stop, but the
Record Icon
is still on, press the
SD Card Icon
to stop the logging before removing
the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the car is
stationary. Always check the
Record Icon
before ejecting the card.
IMPORTANT
– The SD card shouldn't be removed when the Record Icon is on as you may lose data.
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC before it
can be reused.
SD Card Format
VBOX Touch is supplied with an 8 GB SDHC card in a
FAT32
file format, which is the
only
file format supported.
If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of above 7 MB/s
(4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). Racelogic recommend SD cards from quality
brands such as Transcend, SanDisk, Kingston or Lexar to ensure best results.
IMPORTANT
– If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into
a FAT32 file system before it will work with a VBOX Touch unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the
FAT32
file format. This format
is supported
by VBOX Touch.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in
exFAT
or
NTFS
file formats; these formats
are not supported
by VBOX
Touch (please reformat as per instructions below).
SD Card Reformatting
• FAT32 reformatting for media with sizes up to 32 GB can be done directly within Windows by right clicking on the
media and selecting '
Format
'.
• If you would like to format media with sizes above 32 GB in to a FAT32 file system, this isn't something that can be
done directly within Windows as it is not the standard formatting for the file. However, many third party software
programs can be used to reformat media to allow them to work correctly with our products - we can recommend
as a free option from the SD card organisation.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/02_-
_VBOX_Touch_Getting_Started
7
