unit. However, you can also independently update the Track Database by pressing the
Load Track Database
button
within the
. If an SD card is detected and a saved
.tdb
or
.bdb
track database file is located within
the root directory of the SD card (not in the media or any other folder), the unit will start to load the file, which will update
the tracks list but not overwrite any existing track information.
Progress of the track database update will be displayed via the LEDs; each lit LED will represent 25% of the process
with all LEDs extinguishing when the process is complete.
This area also displays the currently installed track database version information.
More information on loading a Track Database can be found
Lap Timing Gates
Load Start/Finish or Finish Line Gates
You can load previously saved or provided Start/Finish line gates by inserting an SD card with gate files contained
within a
SF LINES
folder into the unit and then pressing the
Load Lap Timing Gates
button within the
. If only one file is located on the SD card, the file will be loaded immediately.
If multiple files are located on the SD card, the unit will display all available files. Select a file and then press the
Confirm Button
on the bottom right of the screen, or press the
Cancel Button
on the bottom left of the screen to return the Settings screen without saving. When loaded, a success screen will briefly
display to show that it is was loaded successfully. If there are splits stored within the file, these will also be uploaded to
the unit, up to a maximum of 10 gates/splits.
Note: When a new Start/Finish or Finish line gate is loaded, all existing lap timing values will be cleared and the new lap
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/04_-
_VBOX_Touch_Display_Modes/VBOX_Touch_-_Lap_Timing_Mode
63
