Notes:
▪
Manually pressing the
will manually start and stop recording, irregardless of which logging
mode is set.
▪
A new data file is created every time the VBOX Touch starts/stops logging, data is not appended to an
existing data file.
▪
Continuous logging mode should be selected if you are using a Hand Held Start/Stop Logging Switch
(RLVBACS010) to control logging.
•
Results Save Format:
Allows change the data format of results saved (to inserted SD card) from test history
screens. Options are either text format (.txt,
default
) or comma-separated values format (.csv).
•
Screen Brightness:
You can manually adjust the screen brightness between 5 levels, with 1 being the dimmest
and 5 being the brightest setting. An '
Auto
' setting is also available which uses the internal ambient light sensor to
automatically adjust the screen brightness. In dark conditions, the screen brightness will dim, and in light conditions
the screen will brighten. Tap the button to cycle through the available options.
•
LED Brightness:
You can manually adjust the LED brightness between 5 levels, with 1 being the dimmest and 5
being the brightest setting (
this is extremely bright!
) or turn off the LEDs. Tap the button to cycle through the
available options, the LEDs will preview the brightness level.
•
GNSS Selection (VBOX Touch RTK units only):
VBOX Touch RTK is capable of tracking 3 GNSS constellations:
GPS, Galileo and then a choice of either GLONASS (default) or BeiDou. Tap the button to change the between the
two options. The number of satellites the receiver is currently using from each constellation can be seen within
the
area of the Diagnostics Settings Menu.
The constellations selected are also included within the header of a logged file.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/05_-
_VBOX_Touch_Settings
83
