Connection to a Local DGNSS Base Station
VBOX Touch RTK receives RTCM correction data from a telemetry radio module which acts as receiver for information
transmitted by the Racelogic DGNSS Base Station. It is connected to the
of the VBOX Touch
via an RLCAB005.
Racelogic also provide solutions to use SATEL radio modems for long range applications on large test sites. The
connection to the VBOX will be the same in this instance, however instead of an RLCAB005, an RLCAB096L would be
used which has a 15 way D-Sub connector for connection to the SATEL radio modem.
Ensure that the Base Station is correctly configured for use before connecting to the unit.
Configuration
1. Apply power to the unit and then go to the '
Settings
' menu by selecting the
Settings Button
on the bottom left of the screen.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/06_-_VBOX_Touch_RTK
93
